Gate, garage and rolling shutter automation

Showing 301-312 of 334 item(s)

Plastic key switch, surface-mounted, 2 micro switches - Tecno Automazione SCU2MZT

25.005.1007006

Made in Italy.

€27.50

Control unit T011A 230Vac 433,92MHz with radio module, transformer, casing and box - Tecno Automazione KITBR5T

25.005.0520001

Made in Italy.2 displays and 4 buttons to customise the gate movement down to the smallest detail.Many functions, each configurable according to the system's characteristics, the installer's wishes and the customer's request.Slowdown, gate leaf displacement, obstacle detection sensor and electronic limit switch to name but a few.Easy memorisation and...

€95.50

Container for radio modules - Tecno Automazione RANPC5T

25.005.1004000

It can contain the R2A radio (RADAU4T) and the control unit radio module (RADCN4T).Can be installed in combination with One Up beacons.

€8.31

Nylon modular rack, 2 metres, 4 x 50 cm racks - Tecno Automation CREFX5T

25.005.1009000

Made in Italy.A total of 2 metres of rack consisting of 4 nylon (plastic) rack bars 50 cm long and mounting accessories, the kit is compatible with all sliding motors.A very robust and easy-to-assemble rack, with special precautions it can also be used with gates weighing more than 1500 kg.

€25.60

Nice FLO4R-S door opener radio remote control, 4 channels, 433.92 MHz, rolling code

25.005.0103001

A fully functioning radio transmitter is required for duplication.Duplication must be carried out in the vicinity of the receiver.1 - Press the button you wish to encode on the new remote control for about 7 seconds.2 - Press the button of the working remote control three times in succession.3 - Press the key of the new remote control.4 - Wait 10 seconds...

€28.80

Radio gate opener ACM TX2, 2 channels, 433.92 MHz, rolling code, white

25.005.0100101

Remote control for ACM awnings, shutters and blinds.Programming on radio card.Compatible with control units: LS 1240, LS 1240 SE, LS 1254, LS 1254 SE, LS 1288, LS 1288 SE, LS2023, LS 2023 SE, RX2.

€31.10

Radio door opener XT4 433 SL, 4 channels, 433.92 MHz, fixed code - FAAC 787015

25.005.0100005

A functioning radio control unit is required for duplication.1 - Place the new radio control unit and the functioning radio control unit face to face.2 - Press and hold down the button to be duplicated on the working remote control.3 - Press and hold down the button on the new remote control.4 - A brief flashing light on the new remote control indicates...

€36.20

Nice FLO4 gate opener radio remote control with dip switch, 4 channels, 433.92 MHz, fixed code

25.005.0103015

To duplicate the dip switch radio control, simply arrange the levers of the new radio control in the same order as the one already in operation.

€31.10

Nice FLO1 gate opener radio remote control with dip switch, 1 channel, 433.92 MHz, fixed code

25.005.0103013

To duplicate the dip switch radio control, simply arrange the levers of the new radio control in the same order as the one already in operation.

€29.30

Genius KILO-TX4 gate opener radio remote control, 4 channels, 868.35 MHz, rolling code

25.005.0101902

A functioning MASTER remote control is required for duplication.MASTER: by pressing any key, the LED flashes before switching on with a steady light.SLAVE: by pressing any key, the LED immediately turns on with a steady light.1 - On a flat surface place the new remote control and the working one head to head.2 - Simultaneously press the P1 and P2 buttons...

€28.00

Radio gate opener Cardin S449-QZ2, 2 channels, 433.92 MHz, rolling code

25.005.0101100

A fully functioning radio transmitter is required for duplication.The duplication procedure must be carried out in the vicinity of the receiver.1 - Press the button hidden in the hole under the buttons of the working radio control; when the control unit emits a brief sound, release the button.2 - Press the button of the working radio control instantly;...

€25.50

Radio gate opener CAME AT02D, 2 channels, 433.92 MHz, rolling code

25.005.0100903

A fully functioning radio transmitter is required for duplication.The duplication procedure must be carried out in the vicinity of the receiver.1 - Press and hold button 1 of the working remote control until the LED lights up steadily (approx. 10 sec.).2 - Press the button to be memorised on the new remote control within 20 seconds.3 - Wait at least 20...

€25.50