A fully functioning radio transmitter is required for duplication.Duplication must be carried out in the vicinity of the receiver.1 - Press the internal button P3 on the functioning radio control, the receiver will emit a continuous sound for 5 seconds.2 - Within 5 seconds, press the button in the receiver's memory which is to store the new code, the...
A fully functioning radio transmitter is required for duplication.Duplication must be carried out in the vicinity of the receiver.1 - Press the internal button P3 on the functioning radio control, the receiver will emit a continuous sound for 5 seconds.2 - Within 5 seconds, press the button in the receiver's memory which is to store the new code, the...
The memorisation procedure must be carried out by acting directly on the receiver.1 - Press and release the P1 button on the receiver; LED L1 will emit a series of 5 flashes.2 - During the flashing of the LED on the receiver, press the button of the new remote control to be programmed.3 - LED L1 will light up for approximately 3 seconds to confirm correct...
The memorisation procedure must be carried out by acting directly on the receiver.1 - Press and release the P1 button on the receiver; LED L1 will emit a series of 5 flashes.2 - During the flashing of the LED on the receiver, press the button of the new remote control to be programmed.3 - LED L1 will light up for approximately 3 seconds to confirm correct...
1st method:A fully functioning radio control is required for duplication.1 - Press and hold down button 2 (top right) of the new remote control and simultaneously press button 1 (top left) 4 times.2 - Release button 1 (top left); the LED on the new remote control will flash slowly.3 - Press and hold down the button you wish to duplicate the working remote...
1st method:A fully functioning radio control is required for duplication.1 - Press and hold down button 2 (top right) of the new remote control and simultaneously press button 1 (top left) 4 times.2 - Release button 1 (top left); the LED on the new remote control will flash slowly.3 - Press and hold down the button you wish to duplicate the working remote...
1st method:A fully functioning radio control is required for duplication.1 - Press and hold down button 2 (top right) of the new remote control and simultaneously press button 1 (top left) 4 times.2 - Release button 1 (top left); the LED on the new remote control will flash slowly.3 - Press and hold down the button you wish to duplicate the working remote...
The memorisation procedure must be carried out by acting directly on the receiver.1 - To memorise the first channel, press the T1 button on the receiver once; LEDs L1 (red) and L5 (green) will light up.2 - Bring the new remote control closer to the receiver, press and hold the button you wish to memorise until the LEDs on the receiver go out.3 - To...
The memorisation procedure must be carried out by acting directly on the receiver.1 - On the receiver, press the PG programming button twice, prolonging the last press.2 - The LED1 above the PG button will flash 2 times.3 - Press the button to be memorised on the new radio control.4 - LED 1 will light up steadily for a few seconds to confirm that it has...
The memorisation procedure must be carried out by acting directly on the receiver.1 - On the receiver, press the PG programming button twice, prolonging the last press.2 - The LED1 above the PG button will flash 2 times.3 - Press the button to be memorised on the new radio control.4 - LED 1 lights up with a steady light for a few seconds to confirm that...