Gate opener radio controls

Showing 109-120 of 163 item(s)

Radio gate opener SEAV BE HAPPY RH2, 2 channels, 868.35 MHz, rolling code

25.005.0103901

€34.50

Radio gate opener SEA COCCINELLA 4 868, 4 channels, 868.35 MHz, rolling code

25.005.0103804

The storage procedure must be carried out in the vicinity of the receiver.1st method:A fully functioning radio control unit is required for duplication.1 - Open the working remote control and press the T5 button.2 - The receiver enters learning mode.3 - Within 18 seconds, press a key on the new remote control.4 - If the two keys of the working remote...

€37.40

Radio gate opener SEA HEAD 4 868, 4 channels, 868.35 MHz, rolling code

25.005.0103803

A fully functioning radio transmitter is required for duplication.The storage procedure must be carried out in the vicinity of the receiver.1st method:1 - Open the working remote control and press the T5 button.2 - The receiver enters learning mode.3 - Within 18 seconds, press a key on the new remote control.4 - If the two keys of the working remote...

€36.90

Radio gate opener SEA HEAD 4 433, 4 channels, 433.92 MHz, rolling code

25.005.0103801

€36.40

Radio gate opener SEA HEAD 2 433, 2 channels, 433.92 MHz, rolling code

25.005.0103800

€35.30

Nice ON4E-FM door opener radio remote control, 4 channels, 868.35 MHz, rolling code

25.005.0103009

A fully functioning radio control is required for duplication.1st method:1 - Place the working remote control and the new remote control opposite each other.2 - Press and hold down the button on the new remote control until the red LED on the working remote control comes on; release the button.3 - Press the button on the working remote control while the...

€41.90

Radio gate opener Life FIDO2, 2 channels, 433.92 MHz, rolling code

25.005.0102703

The duplication procedure must be carried out by acting directly on the receiver.1 - Press the PROGR or F1 button on the receiver board; the LED lights up.2 - Press the key to be memorised on the new remote control.3 - The LED switches on and off to confirm that it has been memorised.4 - Wait 15 seconds and try out the new remote control.

€29.70

Radio gate opener remote control, universal self-learning, 4 channels, fixed code 433.92MHz, colour black - Ettrogate ET6003

25.005.0104700

Universal remote control, compatible with 433.92 MHz fixed code remote controls.With sliding protective cover.Programming instructions:1 - Reset before copying: press buttons A and B at the same time and while continuing to press, the LED will flash once, do not release and hold both buttons for 7 seconds, the LED will flash quickly to indicate that the...

€2.78

Radio door opener XT4 433 RC, 4 channels, 433.92 MHz, rolling code - FAAC 787456

25.005.0100006

Usage frequency 433.92 MHzEncoding type: rolling code technology: the code changes each time the transmitter is used. An algorithm recognises and validates the signal only of transmitters encoded by the receiver.

€23.60

JCM GOPRO-2 radio gate opener, 2 channels, 868.35 MHz, rolling code

25.005.0102300

A fully functioning radio control unit is required for duplication.1 - Place the new radio control unit and the working radio control unit face to face.2 - Press and hold down button 1 on the working remote control until storage is complete.3 - Press both keys of the new remote control at the same time; it will flash 3 times to indicate that it has been...

€46.80

Radio gate opener TAU 250-SLIMRP, 2 channels, 433.92 MHz, rolling code

25.005.0104300

The memorisation procedure must be carried out by acting directly on the receiver.1 - To memorise the first channel, press the T1 button on the receiver once; LEDs L1 (red) and L5 (green) will light up.2 - Bring the new remote control closer to the receiver, press and hold the button you wish to memorise until the LEDs on the receiver go out.3 - To...

€29.70