List of products by brand Alcapower

SOB LED Strip, 5 metres, IP20, 24V, 15 W/m, 2000 lm/m, CRI 90

Available with warm light 3000K (927097 SOB15W-3000K), natural light 4000K (927098 SOB15W-4000K) and cold light 6400K (927115 SOB15W-6500K). The SOB LED strip is one of the most advanced solutions for continuous and perfectly uniform linear lighting without a pinpoint effect thanks to Side-On-Board technology. With a length of 5...
€53.20

Switching power supply, 20W, AC 220-240V, DC 12V 1.66A, IP67 - AlcaPower IP1220

05.002.0607001
The IP1220 switching power supply is a waterproof IP67 unit designed for lighting applications in humid or outdoor environments.With 220-240V AC input and stable 12V DC 1.66A output (20W nominal), it provides reliability and protection against overload, overvoltage, short circuit, and overtemperature.Compatible with 12V LED strips, it supports...
€9.80

Switching power supply ultracompact, 20W, AC 100-240V, DC 12V 1.66A, IP67, 5.5x2.1mm plug - AlcaPower IP1220R

05.002.0607002
The ultracompact IP1220R switching power supply is a waterproof IP67 unit with DC 5.5x2.1mm plug for lighting applications in humid or outdoor settings.With universal 100-240V AC 50/60Hz input and 12V DC ±5% 1.67A max output (20W nominal), it features high average efficiency 89.11% and no-load consumption <0.1W.Class II insulation, full protections and...
€9.80

SOB LED Strip, 5 metres, IP65, 24V, 15 W/m, 2000 lm/m

Available in warm light 3000K (927116 SOB15W-3000K-IP65), natural light 4000K (927117 SOB15W-4000K-IP65) and cold light 6400K (927118 SOB15W-6500K-IP65). The SOB LED strip combines the perfect uniformity of Side-On-Board technology with IP65 protection for use in wet or exposed environments. With 5 metres length, 24V DC and 15 W/m...
€57.60

3-way Y-junction with quick connection, 3 poles, for cable 0.5~2.5mm2, diameter Ø5~12mm, IP68, 380V 16A - Alcapower 930495

62.901.0310002
Quick waterproof coupling for outdoor electrical connections or in wet environments.Designed for quick installation without special tools, it offers an IP68 rating for water, dust and immersion resistance.It supports a maximum current of 16A and voltage up to 380V, with 3 poles for 0.5 to 2.5 mm² conductors.Cable gland 1.5xM20 and adaptable seals:...
€7.21

D lithium thionyl chloride Li-SOCl2 3.6V 14000 mAh battery - Alcapower ER34615

01.201.0503206
The Alcapower ER34615 primary Li-SOCl2 battery in ER34615 format (D standard) provides 3.6 V and 14000 mAh capacity. High energy density chemistry with 10-15 year shelf life and <1% annual self-discharge. Ideal for very high-autonomy applications such as remote monitoring systems, utility meters, advanced beacons, military equipment, and low-power...
€17.20

1/2AA lithium thionyl chloride Li-SOCl2 3.6V 1200mAh battery - Alcapower ER14250

01.201.0504603
The Alcapower ER14250 primary lithium thionyl chloride (Li-SOCl2) battery in 1/2AA size delivers a stable nominal voltage of 3.6 V and high capacity of 1200 mAh. Thanks to Li-SOCl2 chemistry, it provides very high energy density, extremely long shelf life (up to 10-15 years in standby) and minimal self-discharge below 1% per year. Ideal for low continuous...
€2.53

COB Surface LED strip, 5 metres, IP20, 24V, 25 W/m, 2600 lm/m

Available with warm light 3000K (927041 LSC25W-3000K), natural light 4000K (927042 LSC25W-4000K) and cold light 6500K (927043 LSC25W-6500K).The COB Surface LED strip offers continuous and uniform linear illumination without visible spots thanks to Chip on Board technology. With a length of 5 metres, 24V DC voltage and 25 W/m power, it achieves a luminous...
€54.10

Battery charger for Ni-Cd and Ni-Mh battery packs, voltage 1.2V~12V, current 50mA~300mA - Alcapower AP2168

01.100.0060012
The AP2168 is a universal constant current charger with auto-detect control for charging single 1.2V batteries and battery packs of up to 12V of the Ni-Cd and Ni-MH type.To give the user maximum performance, the AP2168 is equipped with reverse polarity, temporary short circuit and overcharge protection.Thanks to the possibility to select the charging...
€14.60

Battery charger for Li-Ion and Li-Po battery packs 1 to 4 cells, output 3.7V~16.8V 1A, connector 5.5x2.5mm - Alcapower AP3714

01.100.0080001
The AlcaPower AP3714 is a battery charger for charging 1- to 4-cell Li-Ion and Li-Po rechargeable battery packs with automatic recognition of the number of cells in the connected pack.3-step charging method: charge at constant current (DC) of 200mA until the battery reaches 3V (1S) / 6V (2S) / 9V (3S) / 12V(4S), then charge at constant current (DC) of 1A...
Last items in stock
€22.90

Charger for lead-acid battery packs 36V 2A, ideal for scooters and electric bikes, 5.5x2.1mm connector - Alcapower P36V2

01.100.0091000
Optional cables with connectors are available and can be purchased separately: XLR 3-pin, coaxial 8.5mm, 3-port inline, alligator clips.Features:- Charger for 36V lead-acid battery packs;- Output voltage: 43.2V DC;- Charging process activation threshold: 41.2V;- Charging current: 2A;- Output connector: 5.5x2.1*10mm.
Last items in stock
€41.00

3-outlet hub for Alcapower SX series chargers, for simultaneous charging of 3 different batteries - Alcapower SX-HUB

01.500.0200000
Designed for simultaneous charging of 3 different batteries.Uniquely compatible with AlcaPower SX series battery chargers.Can be operated via App on Apple iOS 8.0 or later and Android 4.4 or later systems.To install the App, search for "AP charger 2.0" in the App Store or Google Play.Features:- Input: 6V/12V/24V DC;- Current: 10A max;- No-load...
€18.40

Universal 2-slot charger for Ni-MH, Ni-Cd, Li-ion and LiFePO4 batteries with LCD display and USB-C input - Alcapower UC2

01.100.0080002
The Alcapower UC2 charger is a smart and versatile device with two independent slots for safely charging rechargeable Ni-MH, Ni-Cd, Li-ion, and LiFePO4 batteries. Equipped with USB Type-C input for 5V 2A power and an LCD display showing voltage, current, charge status, and battery type for each slot. Supports single mode charging (up to 2A) or dual (1A...
€24.00

Li-Ion battery charger 12V, output 12,6V 2A, connector 5,5x2,1mm - Alcapower AP12LI-ION

01.100.0080000
The AP12LI-ION is a battery charger designed for charging Li-Ion battery packs with a voltage of 12.6V DC.It charges your battery pack at 12.6V DC by delivering a constant current of 2A ±10% until the battery pack reaches a state of charge equal to 80% of its capacity, after which it delivers a constant voltage of 12.6V ±2% and gradually reduces the...
Last items in stock
€19.20

Portable night light, 2W, dimmable, selectable CCT colour 3000K/4000K/6500K, USB charging - Alcapower AP090X

02.013.0000009
LED, rechargeable, CCT, dimmable night lamp with a simple design that requires no mains connection to operate.To switch the lamp on and off use the on/off button at the bottom of the lamp.To switch on, switch off and adjust the light use the touch button on the top of the lamp.ON/OFF - Turns the lamp on/offSINGLE TOUCH - Turns the light on, selects the...
€15.50

Hermetic end caps kit for Snake Flex LED strips, secure and reliable closure - AlcaPower SF-TAP230

02.181.5030004
The SF-TAP230 kit includes hermetic end caps specifically designed for Snake Flex LED strips, providing perfect sealing at the strip ends. Made of durable flexible plastic, they maintain IP65 protection by preventing water, dust and moisture ingress. Ideal for outdoor installations, gardens, facades or damp environments exposed to weather. Easy to apply...
€4.31

COB Dynamic LED Strip, with light effects, 5 metres, IP20, 24V, natural white 4000K, 13 W/m - AlcaPower LSC24V-4000K-DIGITAL

02.181.0110014
The LSC24V-4000K-DIGITAL Dynamic COB LED Strip allows you to create dynamic and customised light effects using COB technology with chasing and animation effects.With a length of 5 metres and 24V DC power supply, it offers uniform illumination without visible spots, with a neutral temperature of 4000K for bright and comfortable environments.This strip is...
€63.30

Angular aluminum profile with opaque cover, 2 meters length, 20 W/m dissipation - AlcaPower ALU-PR02

02.181.6010045
The angular aluminum profile ALU-PR02 with opaque cover is designed for 90° installations or edges, providing a clean and professional look.Made of extruded aluminum with excellent heat dissipation up to 20 W/m, it protects LED strips from overheating and extends lifespan.The opaque polycarbonate cover diffuses light evenly eliminating dot effect, ideal...
€11.80

Flat aluminum profile with opaque cover, 2 meters length, 20 W/m dissipation - AlcaPower ALU-PR01

02.181.6010046
The flat aluminum profile ALU-PR01 with opaque cover is a high-quality channel for discreet and professional LED strip installation.Made of extruded aluminum, it provides excellent heat dissipation up to 20 W/m, protecting strips from overheating and extending lifespan.The opaque polycarbonate cover diffuses light evenly eliminating dot effect, ideal for...
€11.90

Power adapter with integrated rectifier, 230V, 1300W power - AlcaPower CA220

02.181.5060001
The CA220 adapter with built-in rectifier converts 230V AC mains to DC for direct powering of high-power 230V LED strips.With 230V DC 8A output and max 1300W power (0.9 power factor), compatible only with specific AlcaPower codes (927020, 927021, 927022).Ideal for large-scale or long-line installations, provides stable power and reduces multiple PSU...
€9.00

Quick solderless connector for Snake Flex LED strips, fast and secure connection - AlcaPower SF-CR230

02.181.5020006
The SF-CR230 quick connector enables instant joining of Snake Flex LED strips or connection to power supply without soldering or special tools. Designed to maintain IP65 rating, it ensures reliable electrical continuity even in damp or outdoor environments. Pressure or clip design for secure fit on 10x10 mm section, drastically reduces installation time...
€3.49

Cable with plug, switch and connector, 1 m length, for 230V LED strips - AlcaPower CA220SW

02.181.5020011
The 1 m CA220SW cable includes plug, built-in switch, and guided connector for convenient on/off control of 230V LED strips.With 15x8.6 mm connector, compatible with AlcaPower HEM IP65 MILKY and LED COB MILKY strips, providing direct control without external switches.Usable length 1 m (excl. connector/plug) offers flexibility in accessible areas.Perfect...
Last items in stock
€19.70

Waterproof connector for LED Wall Washer, IP65 - AlcaPower LS24V-CON1

02.181.5020016
The waterproof connector LS24V-CON1 is designed for secure and sealed connection of Wall Washer LED strip segments or extensions.It ensures IP65 sealing against water and dust, maintaining electrical continuity and signal in humid or outdoor environments.Easy to install without special tools, ideal for outdoor applications, illuminated facades or...
€8.40

Analog dimmer for LED strips, rotary control, for 12-24V DC - AlcaPower DIM-ROT

02.181.5010034
The DIM-ROT analog dimmer is a simple and cost-effective controller for low-voltage LED strips.Featuring a rotary knob to adjust brightness from 0% to 100%, it supports 12-24V DC and loads up to a specified power (check specs).Installs easily inline between power supply and LED strip, ideal for applications needing direct and intuitive manual...
€11.00
Product added to wishlist
Product added to compare.